Go to LTwiki

J. JFET Transistor

Symbol Names: NJF, PJF

Syntax: Jxxx D G S <model> [area] [off] [IC=Vds, Vgs] [temp=T]

Examples:

J1 0 in out MyJFETmodel
.model MyJFETmodel NJF(Lambda=.001)

J2 0 in out MyPJFETmodel
.model MyPJFETmodel PJF(Lambda=.001)

A JFET transistor requires a .model card to specify its characteristics. Note that the model card keywords NJF and PJF specify the polarity of the transistor. The area factor determines the number of equivalent parallel devices of a specified model.

The JFET model is derived from the FET model of Shichman and Hodges extended to include Gate junction recombination current and impact ionization. The DC characteristics are defined by the parameters VTO and BETA, which determine the variation of drain current with gate voltage; LAMBDA, which determines the output conductance; and Is, the saturation current of the two gate junctions. Two ohmic resistances, Rd and Rs, are included. Charge storage is modeled by nonlinear depletion layer capacitances for both gate junctions; which vary as the -1/2 power of junction voltage and are defined by the parameters Cgs, Cgd, and PB. A fitting parameter B has been added. See A. E. Parker and D. J. Skellern, An Improved FET Model for Computer Simulators, IEEE Trans CAD, vol. 9, no. 5, pp. 551-553, May 1990.

NameDescriptionUnitsDefaultExample
VtoThreshold voltageV-2.0-2.0
BetaTransconductance parameterA/V21e-41e-3
LambdaChannel-length modulation parameter1/V01e-4
RdDrain ohmic resistanceΩ0.100
RsSource ohmic resistanceΩ0.100
CgsZero-bias G-S junction capacitanceF0.5p
CgdZero-bias G-D junction capacitanceF0.1p
PbGate junction potentialV1.0.6
mGate junction grading coefficient-.50.8
IsGate junction saturation currentA1e-141e-14
BDoping tail parameter-11.1
KFFlicker noise coefficient-0 
NlevNoise equation selector-03
GdsnoiShot noise coefficient for nlev=3-1.2.
AFFlicker noise exponent-1 
FcCoefficient for forward-depletion capacitance-.5 
TnomParameter measurement temperature°C2750
BetaTceTransconductance parameter exponential temperature coefficient%/°C0 
VtoTcThreshold voltage temperature coefficientV/°C0 
NGate junction emission coefficient-1. 
IsrGate junction recombination current parameterA0. 
NrEmission coefficient for Isr-2 
alphaIonization coefficient1/V0 
VkIonization knee voltageV0 
XtiSaturation current temperature coefficient-3 
mfgAnnotation of manufacturer-3ACME Semi Ltd.