Difference between revisions of "LTspice Genealogy - The Heritage of Simulation Ubiquity"

From LTwiki-Wiki for LTspice
m (1969: Beginnings of CANCER (Computer Analysis of Nonlinear Circuits, Excluding Radiation))
(The Road To LTspice)
Line 70: Line 70:
  
 
== The Road To LTspice ==
 
== The Road To LTspice ==
* 1981 Linear Technology Corporation founded
+
* 1991 DOS SwitcherCAD available from LTC (equation based)
* 1991 DOS SwitcherCAD available (equation based)
+
* 1992 First ever port to Linux of SPICE (3E2) publicaly released by Mike Engelhardt
* 1996 μPower SwitcherCAD available(simulation based)
+
* 1994? Development at LTC of in-house advanced simulator begins based on Berkeley SPICE 3F4/5
 +
** Code extensively revised to improve performance on machines with faster processors than memory
 +
** Vastly improved convergence and time step control over that of Berkeley SPICE
 +
** Added support for important industry standard device, model and behavioral extensions
 +
* 1996 μPower SwitcherCAD available from LTC (simulation based)
 +
* Proprietary mixed-mode HDL capability added to LTC's in-house simulator
 +
** Efficiently handles extremely tight feedback between analog and digital sections
 +
** Greatly reduces node count in switched-mode IC macro models
 +
* 1998 SwitcherCAD released for internal review at LTC
 +
**  Decision made to extend PSpice syntax recognition to simplify user support and ease of use with existing models
  
 
=== 1999: LTspice/SwitcherCAD III first released to public ===
 
=== 1999: LTspice/SwitcherCAD III first released to public ===
 +
* Includes P-SPICE compatible semiconductor, device and syntax model extensions
 +
** Diode recombination current, bipolar quasi-saturation and JFET deep impact ionization
 +
** Behavioral modeling (legacy 2G6 POLY statements, arbitrary expressions, Laplace, and look-up tables)
 +
* Includes an original mixed mode simulator with native digital library (not X-SPICE based)
 +
* Inductors and capacitors come with extensive built-in parasitics available, yet don't cost any extra nodes
 +
* New arbitrary capacitance device (user inputs charge expression)
 +
** Is internally symbolically differentiated and then capacitance is integrated
 +
* Initial release extends MOSFET model support to BSIM 3.2.2 and BSIM 4.1 (BSIMPD 2.2 and EKV 2.6 followed shortly thereafter)
 +
* Also includes a native power VDMOS device model with integral nonlinear interelectrode capacitances
 +
* Waveform viewer with marching waveforms and dynamic waveform data compression
 +
* Built-in device library/database (includes many power MOSFETs, diodes, bipolars, JFETS and switch-mode controllers)
 +
* Built-in program update checker (bug fixes and feature additions available near real time)
  
=== 2008: LTspice IV ===
+
==== Important Follow-on Enhancements ====
 +
* noteworthy events/additions to be added here shortly
 +
Feb02: Added preliminary support for ddt(), idt(), and idtmod() analog behavioral functions.
 +
May02: Implemented binning for all MOS and BSIM models.
 +
Jan03: Hierarchical schematics added.
 +
Jan03: A graphical symbol editor was introduced.
 +
Mar03: Keyboard short cuts are now user definable.
 +
Jun03: Added an alternate solver (uses a 1/2x slower but >1000x more accurate sparse matrix package).
 +
Aug03: Implemented differential cross probing (drag the mouse between two wires).
 +
Jan04: Added the ability to annotate waveform plots with graphics and text.
 +
Apr04: Chan inductor, undocumented behavioral inductor revealed.
 +
Dec04: Implemented .measure commands.
 +
Feb05: .raw files can now be converted to a Fast Access format that allows new plot traces to be added.
 +
Jun06: Added continuous derivative level 2 devices to the ideal diode and voltage controlled switch.
 +
Other: ako, param stepping, unlimited undo and redo, parametric (x-y) plotting, Fourier analysis (both .four statements and FFT's of simulated data), amp and power meters
  
Some possible noteworthy events/additions:
+
=== 2008: LTspice IV released ===
 +
* obviously still under construction
 +
multi-threaded solvers to better utilize current multi-core processors,
 +
new SPARSE matrix solvers that deploy self-authoring code which is assembled and linked on the fly in order to approach the theoretical flop limit of current FPU's (large circuits run up to 3x faster on quad core processors).
 +
LTspice is overwhelmingly the most widely distributed (over 3 million sold) and used SPICE program
  
Ver 2 Jan03: graphical symbol editor hierarchical schematics
+
KEY EVENT: has become the de facto standard SPICE program
Apr04: Chan inductor, undocumented behavioral inductor revealed
+
 +
Feb09: A symbol can now be automatically generated for a schematic.
 +
Apr09: The data from a .step'ed .meas statements can now be reformatted to a .raw file and plotted (View=>SPICE Error Log then right button menu).
 +
Jul09: Reimplemented MOS levels 1, 2, and 3 to use the Yang-Chatterjee charge model instead of the Meyer capacitance model and added warnings when using archaic MOS levels 1, 2, or 3 below reasonable dimensions.
 +
Sep10: The .op values can now be displayed on the schematic while plotting .ac or .noise data (schematic right button menu->View->Place .op Data Label)
 +
Dec11: The LTspice-Gummel-Poon now supports a parasitic PNP to accurately model the substrate behavior of a vertical NPN. 
 +
Mar13: Added a level 73 MOSFET: HiSIM-HV from Hiroshima University and STARC.

Revision as of 13:57, 18 July 2013

1969: Beginnings of CANCER (Computer Analysis of Nonlinear Circuits, Excluding Radiation)

  • CANCER began as a derivative of a program that was the class project of a series of courses taught by Ron Rohrer with the approval and encouragement of Professor Donald O. Pederson
  • Larry Nagel wrote the netlist parser and the analysis core and was student group leader
  • Lynn Weber developed a noise analysis feature that utilized adjoint network techniques
  • Bob Berry wrote the sparse matrix LU decomposition package
  • CANCER project's key features:
    • Was the first circuit simulator to utilize sparse matrix techniques
    • Used Newton-Raphson iteration method heuristically modified for bipolar circuits
    • Utilized implicit integration to accommodate widely spread time constants of an IC
    • Integrated DC operating point analysis, small-signal AC analysis and transient analysis
  • Project presented by Ron Rohrer at the 1971 ISSCC[1], but the code was considered partially proprietary and was never publicly released

1971: SPICE 1 (Simulation Program with IC Emphasis) - direct outgrowth of CANCER

  • Ron Rohrer leaves UC Berkeley and further development of CANCER (renamed SPICE) became Larry Nagel's Masters project with Don Pederson taking over as faculty advisor
  • KEY EVENT: Don Pederson insisted that all further work be releasable to the public domain
  • SPICE 1 release's key features:
    • Models for bipolar transistors were changed to Gummel-Poon equations
    • JFET and Shichman-Hodges MOSFET devices added (for Dave Hodges' MOSFET design class)
    • Fixed time step and strict Nodal Analysis (true voltage sources and inductors not supported)
    • DC, AC, Transient, Noise, and Sensitivity Analyses in the same program
    • Built-in models for diodes, bipolar transistors, MOSFETs, and JFETs
  • Was about 6k lines of FORTRAN at first informal limited public release in late 1971
  • Official public release was May 1972 with first formal paper presented by Don Pederson at the 16th Midwest Symposium on Circuit Theory, April 12, 1973
  • SPICE 1 becomes industry standard simulation tool running on large mainframe computers

1972: SPICE 2 begins

  • First version of SPICE 2 was Larry Nagel's Ph.D. project under Don Pederson
  • Modified Nodal Analysis (MNA) added, enabling voltage sources and inductors for the first time
  • Ellis Cohen added dynamic memory allocation
  • Adjustable time-step control added, greatly speeding most simulations
  • MOSFET and bipolar models overhauled and extended
  • Was about 8k lines of FORTRAN when first released to the public domain in late 1974
  • Larry Nagel departs for Bell Labs and his thesis becomes the SPICE 2 Users Guide

1975: Journey to SPICE 2G6 (the pinnacle FORTRAN version)

  • Ellis Cohen becomes primary contributor with later help from Andrei Vladimirescu
  • First of a series of public revision releases after Nagel's version 2B begin in 1978
  • Along the way, sub circuits, poly sources and transmission lines are added
  • Version 2G6 ends up implementing three MOSFET models:
    • MOS 1 is a simplistic model described purely by ideal square-law I-V characteristics
    • MOS 2 is an analytical model, MOS 3 is a semi-empirical model and both include second-order effects such as channel length modulation, sub threshold conduction, scattering limited velocity saturation, small-size effects, and charge-controlled capacitances
  • 2G6 released to public domain in April 1983 (and is still available today from UC Berkeley)
  • Many commercial simulators today are based on SPICE 2G6

1983: SPICE 3 begins

  • Tom Quarles begins work, writing first version in RATFOR, a C-like preprocessor for FORTRAN
  • Was fully converted to C in 1985 with first early versions released in March of that year
  • Added models: MESFET, lossy transmission line and non-ideal switch
  • Arbitrary behavioral voltage and current sources added
  • Includes polynomial capacitors, inductors and voltage controlled sources
  • Allowed the use of alphabetical node labels rather than only numbers
  • Features a graphical interface for viewing results
  • New version eliminates many convergence problems
  • Added noise, distortion and pole-zero analysis, temperature sweeping, Monte Carlo and Fourier analysis
  • Not fully compatible with SPICE 2G6
  • Was about 135,000 lines of C code at first public release in 1989
  • Final version at Berkeley, SPICE 3F5, released to public in 1993
  • XSPICE was developed at Georgia Tech as an extension to the SPICE language to allow behavioral modeling of components
    • Drastically improve the speeds of mixed-mode and digital simulations

1984: PSpice (micro Processor SPICE)

  • Developed by MicroSim to run on the first IBM PC, initially released in January 1984
  • Was the first commercial offspring of Berkeley SPICE to run directly on the PC platform
  • Was the first SPICE program to gain wide acceptance in both industry and academia
  • KEY EVENT: A zero cost (but node-limited) student version is introduced in 1988 – for the first time, SPICE becomes ubiquitous in the electrical engineering community
  • Evolved from Berkeley SPICE 2G, but added many proprietary enhancements
  • Probe, a waveform viewer module, was added when PC VGA graphics became available
  • Schematics, a graphical front end, was added much later sometime in the early 1990s

The Road To LTspice

  • 1991 DOS SwitcherCAD available from LTC (equation based)
  • 1992 First ever port to Linux of SPICE (3E2) publicaly released by Mike Engelhardt
  • 1994? Development at LTC of in-house advanced simulator begins based on Berkeley SPICE 3F4/5
    • Code extensively revised to improve performance on machines with faster processors than memory
    • Vastly improved convergence and time step control over that of Berkeley SPICE
    • Added support for important industry standard device, model and behavioral extensions
  • 1996 μPower SwitcherCAD available from LTC (simulation based)
  • Proprietary mixed-mode HDL capability added to LTC's in-house simulator
    • Efficiently handles extremely tight feedback between analog and digital sections
    • Greatly reduces node count in switched-mode IC macro models
  • 1998 SwitcherCAD released for internal review at LTC
    • Decision made to extend PSpice syntax recognition to simplify user support and ease of use with existing models

1999: LTspice/SwitcherCAD III first released to public

  • Includes P-SPICE compatible semiconductor, device and syntax model extensions
    • Diode recombination current, bipolar quasi-saturation and JFET deep impact ionization
    • Behavioral modeling (legacy 2G6 POLY statements, arbitrary expressions, Laplace, and look-up tables)
  • Includes an original mixed mode simulator with native digital library (not X-SPICE based)
  • Inductors and capacitors come with extensive built-in parasitics available, yet don't cost any extra nodes
  • New arbitrary capacitance device (user inputs charge expression)
    • Is internally symbolically differentiated and then capacitance is integrated
  • Initial release extends MOSFET model support to BSIM 3.2.2 and BSIM 4.1 (BSIMPD 2.2 and EKV 2.6 followed shortly thereafter)
  • Also includes a native power VDMOS device model with integral nonlinear interelectrode capacitances
  • Waveform viewer with marching waveforms and dynamic waveform data compression
  • Built-in device library/database (includes many power MOSFETs, diodes, bipolars, JFETS and switch-mode controllers)
  • Built-in program update checker (bug fixes and feature additions available near real time)

Important Follow-on Enhancements

  • noteworthy events/additions to be added here shortly
Feb02: Added preliminary support for ddt(), idt(), and idtmod() analog behavioral functions.
May02: Implemented binning for all MOS and BSIM models.
Jan03: Hierarchical schematics added.
Jan03: A graphical symbol editor was introduced.
Mar03: Keyboard short cuts are now user definable.
Jun03: Added an alternate solver (uses a 1/2x slower but >1000x more accurate sparse matrix package).
Aug03: Implemented differential cross probing (drag the mouse between two wires).
Jan04: Added the ability to annotate waveform plots with graphics and text.
Apr04: Chan inductor, undocumented behavioral inductor revealed.
Dec04: Implemented .measure commands.
Feb05: .raw files can now be converted to a Fast Access format that allows new plot traces to be added.
Jun06: Added continuous derivative level 2 devices to the ideal diode and voltage controlled switch.
Other: ako, param stepping, unlimited undo and redo, parametric (x-y) plotting, Fourier analysis (both .four statements and FFT's of simulated data), amp and power meters

2008: LTspice IV released

  • obviously still under construction

multi-threaded solvers to better utilize current multi-core processors, new SPARSE matrix solvers that deploy self-authoring code which is assembled and linked on the fly in order to approach the theoretical flop limit of current FPU's (large circuits run up to 3x faster on quad core processors). LTspice is overwhelmingly the most widely distributed (over 3 million sold) and used SPICE program

KEY EVENT: has become the de facto standard SPICE program

Feb09: A symbol can now be automatically generated for a schematic.
Apr09: The data from a .step'ed .meas statements can now be reformatted to a .raw file and plotted (View=>SPICE Error Log then right button menu).
Jul09: Reimplemented MOS levels 1, 2, and 3 to use the Yang-Chatterjee charge model instead of the Meyer capacitance model and added warnings when using archaic MOS levels 1, 2, or 3 below reasonable dimensions.
Sep10: The .op values can now be displayed on the schematic while plotting .ac or .noise data (schematic right button menu->View->Place .op Data Label)
Dec11: The LTspice-Gummel-Poon now supports a parasitic PNP to accurately model the substrate behavior of a vertical NPN.  
Mar13: Added a level 73 MOSFET: HiSIM-HV from Hiroshima University and STARC.