# Difference between revisions of "Transformers"

(→Okay, but calculating winding inductances is tedious. Is there some way to just enter a turns count for all the windings?) |
(→Okay, but calculating winding inductances is tedious. Is there some way to just enter a turns count for all the windings?) |
||

Line 48: | Line 48: | ||

=== Okay, but calculating winding inductances is tedious. Is there some way to just enter a turns count for all the windings? === | === Okay, but calculating winding inductances is tedious. Is there some way to just enter a turns count for all the windings? === | ||

− | Yes, this can be done in any of a number of ways. For example, the values for each of the inductances may be directly parametrized via <font color="green"><b title="Lx node1 node2 {Lm*(Nx/Nm)**2}">curly braces</b></font> to be a function of turns ratios, or a subcircuit that accepts turns as a parameter may be used to encapsulate the windings implementation details. Below is a schematic of | + | Yes, this can be done in any of a number of ways. For example, the values for each of the inductances may be directly parametrized via <font color="green"><b title="Lx node1 node2 {Lm*(Nx/Nm)**2}">curly braces</b></font> to be a function of turns ratios, or a subcircuit that accepts turns as a parameter may be used to encapsulate the windings implementation details. Below is a schematic of a simple LTspice circuit that is functionally equivalent to a winding (without a core). Note how LTspice's fully extended inductor parasitics are included within this model. In this form (with a standard ''linear'' magnetizing inductance "core") the model is mostly useful as a perceptual window into the way coupled inductors work in LTspice. |

− | + | [[File: SimpleWinding.gif|right|280px|This simple subcircuit is equivalent to an inductor or transformer winding.]] | |

+ | * First, the basic winding: Start (dot), Finish, Core | ||

+ | .subckt Winding s f c params: n=100 L=1u Rs=1m Rp=100 | ||

+ | L1 s 1 {L} Rser={Rs} Rpar={Rp} ; leakage and resistance | ||

+ | E1 1 f c 0 {n} ; impose core voltage onto winding | ||

+ | F1 0 c E1 {n} ; impose winding current onto core | ||

+ | .ends Winding | ||

Note that although this example has only two windings, any arbitrary number of windings are possible (just as with standard coupled inductors).<br />[''This picture should be updated soon to agree with its following subcircuit. -- a.s.''] | Note that although this example has only two windings, any arbitrary number of windings are possible (just as with standard coupled inductors).<br />[''This picture should be updated soon to agree with its following subcircuit. -- a.s.''] | ||

− | |||

− | |||

<br style="clear: both" /> | <br style="clear: both" /> | ||

## Revision as of 17:31, 5 November 2019

## Contents

- 1 Transformers
- 1.1 Introduction
- 1.2 How do I make a transformer in LTspice?
- 1.3 I've created an ideal transformer so it should work at all frequencies, even including DC, right?
- 1.4 I want to model leakage inductance - how should I do that?
- 1.5 How about transformer saturation effects? Can LTspice model those?
- 1.6 Okay, but calculating winding inductances is tedious. Is there some way to just enter a turns count for all the windings?
- 1.7 How do I make a transformer that uses the Chan core model with full saturation and hysteresis?

## Transformers

### Introduction

If you wish to study the behavior of transformers and inductors, explore their mysteries, then LTspice is the ideal learning tool for this purpose. LTspice will faithfully model both ideal and real magnetic devices, but caution is advised when first experimenting with unfamiliar concepts in inductors and transformers. Minimize simulation problems by being sure to include reasonably realistic parasitic resistances (both series and parallel) directly into each inductor, whether used individually or as part of a transformer. A good learning and reference resource is the *Transformer and Inductor Design Handbook* Chapter 17, Winding Capacitance and Leakage Inductance 4th Edition by Colonel William. T. McLyman. Mike Engelhardt, the author of LTspice, explains how to make transformers in LTspice in a 2006 LT-Magazine article.

Please keep in mind that starting a simulation with a dc voltage bias on an inductor or transformer winding will cause an intial inductor current only limited by the inductor's series resistance (this would be like trying to initialize an ideal capacitor with a current source - no matter how small the source, the dc voltage reached will approach infinity). In fact, if you are like most engineers, you are much more comfortable with the behavior of capacitors. If so, use this to your advantage by applying duality to think of what to expect when dealing with inductors.

### How do I make a transformer in LTspice?

Although it is very possible to make a dedicated subcircuit for a specific transformer, the preferred method of making a generic transformer when drafting a simulation schematic is to simply place a separate inductor for each separate transformer winding and then couple them all together magnetically via a single *Mutual Inductance (K) statement* placed as a SPICE Directive on the schematic. Note that inductors called out in a Mutual Inductance statement will be automatically given a phasing dot if one does not already exist.

K1 L1 L2 L3 1 ; causes phasing dots to automatically appear on L1-L3 inductor symbols

When creating a new transformer this way, especially for use in a switched-mode power circuit, it is generally best to first specify the mutual coupling coefficient to be exactly unity. By starting with unity coupling there will be no leakage inductance in any winding and this will minimize the likelihood of the windings ringing at extremely high frequencies (which can slow the simulation to a crawl at each switching edge). However, be aware that a mutual inductance value of plus (or minus) unity *may* lead to simulation difficulties if *Skip-the-initial-operating-point-solution* (UIC) is specified for the .tran command. Prevent this by specifying a realistic resistance for each inductor "winding" (ctrl-right-mouse-click). Note that when coupled inductors are used as transformer windings, individual winding inductances rather than turns ratios must be specified (*inductance ratios should be set to be proportional to the square of the turns ratios*).

### I've created an ideal transformer so it should work at all frequencies, even including DC, right?

No, but lots of users completely misunderstand or overlook this when setting up their simulation. This common mistake can lead to a lot of needless doubt following unexpected and puzzling simulation results produced by LTspice when presented with an ideal transformer that is inadvertently initialized with a large amount of dc voltage applied to its windings. This is probably the most commonly self-inflicted pitfall that trips up users improperly specifying ac voltage sources.

When LTspice calculates initial conditions for voltage sources, it uses the values at time = 0. Depending on the starting phase angle and delay specified for a sine source, this can be as much as the voltage at the peak of the sine wave. When the simulator attempts to find the circuit's initial solution, this is the equivalent to hooking the transformer up to a large dc voltage source. Current will only be limited by winding resistance (which, in the ideal case, may be zero). Note that a real transformer will saturate at a relatively low current and would normally not store much energy (it would also probably burn up with so much dc applied), but an ideal transformer with an ideal magnetizing inductance may store a physically impossible amount of simulated "virtual" energy.

Without realizing it, many users may instruct LTspice to initialize the transformer magnetizing inductance with such huge starting currents. Since they have used an ideal inductance that does not saturate (like a real transformer would), it starts out with dc current that may take many hundreds of line (or switching) cycles to die away. This completely unrealistic energy source then may dominate the simulation, causing strange and unexpected puzzling behavior. In such cases, LTspice is just innocently following the instructions given it and accurately computing the results (garbage in, garbage out).

To avoid this bogus and unwanted result, you must either arrange * the ac source to be zero at time zero* or

**instruct LTspice not to use a dc solution for the starting point (UIC).**### I want to model leakage inductance - how should I do that?

The most flexible method is to keep the windings' mutual inductance statement at unity and add a small discrete leakage inductance in series with each winding. This is the most straightforward way to model transformers with asymmetrical leakage inductances. However, if your transformer is electrically symmetrical, it may be more convenient to simply set the mutual inductance to a value less than one. For each winding the resulting leakage inductance will be (1-K) times that winding's inductance. Note that each winding's coupled inductance also will decrease to K times that winding's inductance, but for typical values of K (>>0.9) this effect will be very small.

This is how LTspice "sees" coupled inductors:

For n inductors coupled together with a K statement, each inductor L1 through Ln is divided into two parts, a completely non-coupled "leakage" inductance equal to (1-K)*Lx (where Lx is the particular inductor in question) and a completely coupled "mutual" inductance equal to K*Lx. Voltage and current ratios of the coupled parts are related by the ratio of the square root of the the inductances L1 through Ln (this is the apparent "turns ratio").

For example, given two inductors coupled by a K statement:

L1 1 0 10H L2 2 0 10H Km L1 L2 0.2

In LTspice, this is the same as:

L1 1 m 8H Lm m 0 2H L2 2 m 8H

Other engineering conventions regarding the definition of K and coupling are irrelevant to LTspice.

### How about transformer saturation effects? Can LTspice model those?

Yes, LTspice comes with a non-linear hysteretic core model built in! This is the 1991 model by John Chan et al. Compared to older core models, the Chan model is particularly robust, computationally efficient and compact, requiring only three parameters to define most any commonly encountered magnetic hysteresis loop. (LTspice also allows building an arbitrary inductance based on self flux and/or any valid function of node voltages and branch currents. The arbitrary inductor model can be very efficiently used to create saturation without hysteresis.)

Once the core material's generic magnetic properties are set, establishing the circuit-level non-linear inductance requires specifying three more parameters to set the geometry of the specific core and specifying one additional parameter for the core winding turn-count. The Chan inductor does not currently directly support Mutual Inductance, so unless only a single-winding inductor is being modeled, multiple windings must be added via additional circuitry. The simplest way to do this is to construct an ideal, unity coupled transformer with as many windings as required and then put the Chan inductor directly in parallel with any one of the windings (taking care to set the turns to match that particular winding). Since the magnetic effects (including non-saturated inductance) are already modeled by the Chan inductor, the inductance of the transformer's parallel winding must be enough larger (>>10) not to significantly load the Chan inductance. As before, the inductances for the other windings should be scaled by the square of their individual turns ratios (with respect to the paralleled winding).

### Okay, but calculating winding inductances is tedious. Is there some way to just enter a turns count for all the windings?

Yes, this can be done in any of a number of ways. For example, the values for each of the inductances may be directly parametrized via **curly braces** to be a function of turns ratios, or a subcircuit that accepts turns as a parameter may be used to encapsulate the windings implementation details. Below is a schematic of a simple LTspice circuit that is functionally equivalent to a winding (without a core). Note how LTspice's fully extended inductor parasitics are included within this model. In this form (with a standard *linear* magnetizing inductance "core") the model is mostly useful as a perceptual window into the way coupled inductors work in LTspice.

* First, the basic winding: Start (dot), Finish, Core .subckt Winding s f c params: n=100 L=1u Rs=1m Rp=100 L1 s 1 {L} Rser={Rs} Rpar={Rp} ; leakage and resistance E1 1 f c 0 {n} ; impose core voltage onto winding F1 0 c E1 {n} ; impose winding current onto core .ends Winding

Note that although this example has only two windings, any arbitrary number of windings are possible (just as with standard coupled inductors).

[*This picture should be updated soon to agree with its following subcircuit. -- a.s.*]

And here is its subcircuit representation in LTspice. Note that the magnetizing inductance "core" is the single summing point for the *ampere-turns* from all the windings and is the sole source of *impressed voltage* (=L*di/dt) reflected onto all the windings. Although this subcircuit is an unnecessary and overly complex representation for a transformer with a linear core inductance, it will be absolutely required if multiple windings are to be "wrapped" onto LTspice's nonlinear Chan inductance model, so take a moment to read it through (the Chan version will follow shortly).

.subckt Xfmr P1 P2 S1 S2 params: + Npri=300 Nsec=30 ; number of turns for primary and secondary (10:1) + L=1u K=0.95 ; single turn winding inductance and coupling factor + Rs=1u Rp=10 Cp=1u ; single turn series/parallel winding parasitics * * Derived Parameters .param Lm=K*L Ls=(1-K)*L ; single turn magnetizing and leakage inductances + Np2=Npri**2 Ns2=Nsec**2 ; turns squared for primary and secondary * * Primary Winding (Np turns) Cp P1 P2 {Cp/Np2} Rpar={Rp*Np2} ; parallel capacitance and resistance Lp P1 n1 {Ls*Np2} Rser={Rs*Np2} ; series leakage inductance and resistance Ep n1 P2 n3 0 {Npri} ; primary winding current sense and reflected magnetizing voltage = L*di/dt Fp 0 n3 Ep {Npri} ; ampere-turns reflected from primary winding * Magnetizing Inductance (1 turn) Lm 0 n3 {Lm} Rser=0 ; ideal magnetizing inductance (for 1 turn) * Secondary Winding (Ns turns) Fs 0 n3 Es {Nsec} ; ampere-turns reflected from secondary winding Es n5 n4 N3 0 {Nsec} ; secondary winding current sense and reflected magnetizing voltage = L*di/dt Ls S1 n5 {Ls*Ns2} Rser={Rs*Np2} ; series leakage inductance and resistance Cs S1 S2 {Cp/Ns2} Rpar={Rp*Np2} ; parallel capacitance and resistance .ends Xfmr

And here is the same thing using parameters within curly braces to give value to LTspice's extended inductors and to a coupling statement (mutual inductance). Note that there is no need to create a subcircuit with this method because Lp and Ls can be placed directly on the schematic as symbols and K1 and the .param statement may be placed as SPICE text (this is the section of netlist that would then result). The prior subcircuit form (or something like it) only becomes necessary in conjunction with a custom two-winding transformer symbol or if a nonlinear core (magnetizing inductance) model must be used.

.param Npri=300 Nsec=30 L=1u K=0.95 Rs=1u Rp=10 Cp=1u + Np2=Npri**2 Ns2=Nsec**2 ; turns squared for primary and secondary Lp P1 P2 {L*Np2} Rser={Rs*Np2} Rpar={Rp*Np2} Cpar={Cp/Np2} Ls S1 S2 {L*Ns2} Rser={Rs*Ns2} Rpar={Rp*Ns2} Cpar={Cp/Ns2} K1 Lp Ls {K}

### How do I make a transformer that uses the Chan core model with full saturation and hysteresis?

Knowing the internal workings of LTspice's coupled inductor style transformer is all very interesting, but how do I make something that uses separate standard inductor symbols for winding, yet also uses the Chan core model with full saturation and hysteresis?

The following method allows this:

File:Separate Winding.png [*obviously, this section is not yet complete*]

This model uses the standard inductor symbol edited to appear as a winding subcircuit on a core (connected through a global node). The core may be linear or nonlinear (e.g., LTspice's built in Chan model) and may have as many windings as required. Due to the use of a global core node (which must be different for each core), a different subcircuit is required for each core.

blog comments powered by Disqus